Iai-america E-Con Bedienungsanleitung PDF herunterladen (Seite 23)

3. X-SEL-J/K/P/Q/JX/KX/PX/QX

(2) Rotary switches

The following can be carried out by rotary switches:

a. Setting of station number

b. Setting of communications speed

a. Setting of station number

In the CC-Link, a maximum of 64 stations can be connected.

The station number is set in the 1 to 64 range by the two rotary switches.

SA  10: Sets the tens place.

SA  1: Sets the ones place.

Station number

Rotary switch selection

number

SA  10 SA  1

0 0 0

1 10 1

2 20 2

3 30 3

4 40 4

5 50 5

6 60 6

7 - 7

8 - 8

9 - 9

(Example)When setting the station number to 12:

Set the rotary switch SA  10 to 1.

Set the rotary switch SA  1 to 2.

Note: The CC-Link first I/O address in PLC is determined according to the master unit installation position and the number of

I/O occupied points of the unit installed prior to that.

The I/O addresses in PLC are assigned from the first I/O address above in order of station number.

For further information regarding setting of the station number and setting of the I/O address in the PLC, refer to the

Operation Manuals for the master unit and PLC to be mounted.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 151 152

Keine Kommentare

Iai-america E-Con Bedienungsanleitung Seite 23